What is 5-axis 3+2 machining? Whats 3+2? 3+2 is three axes plus two axes to achieve five axes 3+2, with and without the tool point to follow, and then with the tool point to follow is able to achieve five axes and five linkage, without the tool point
Why is the five-axis CNC machine tool five-axis linkage, not six-axis linkage? On the one hand, five linkage axes are the minimum number of linkage axes to achieve arbitrary Angle machining. We explained why in the previous paragraph.
Five-axis machining center is a mode of CNC machine tool processing, is currently an important equipment in precision parts processing, but the price of the equipment is higher than ordinary processing equipment,
The solution to mold spots on the surface of die casting aluminum alloy parts is to cut the aluminum alloy die casting parts in time after machining Liquid, handprints and other corrosive substances should be thoroughly cleaned, and then immediately do anti-oxidation treatment, and stored in a dry environment.
For large die-casting parts, it is required that the pressure resistance is strong, the surface electroplating, the general selection of aluminum alloy materials, but the occurrence of foaming after electroplating, we analyze the cause of foaming, I hope you can help after reading.
Zinc alloy die casting has a wide range of applications, which can be seen in electronic products, communications and other fields. Zinc alloy die casting has developed to today is a relatively mature process, but there are still some areas to improve.
Recently, we encountered a very typical zinc alloy die casting customer case.
As a new entrant, I believe everyone is not familiar with the die casting process. Not sure how to get started? Ustar will share technical experience with you.
The increase in demand for zinc alloy die casting has further promoted the expansion of the export zinc alloy die casting market,
The aluminum alloy die casting is heated to a higher temperature, generally about 300 ° C, and after holding for a certain time, the process of cooling to room temperature with the furnace is called annealing.
Aluminum die casting is a more common tool, used in many places, is a very important part, but if it encounters problems in the process of use how to solve it?
