Core Abstract: the casting-china.com' target='_blank'>aluminum alloy die-casting surface technology is rich and varied, and the aluminum alloy die-casting surface effect is very beautiful and fancy. let's look at the other two polishing processes of aluminum alloy die-casting parts.
Two polishing processes for aluminum alloy die casting
The surface technology of aluminum alloy die casting is varied, and the surface effect of aluminum alloy die casting is very beautiful and fancy, let's take a look at the other two polishing technology of aluminum alloy die casting.
1.Alkaline electrolytic polishing process for aluminum alloy die casting
The research on the alkaline polishing solution system was carried out, and the effects of corrosion inhibitors and viscosity agents on the polishing effect were compared.The alkaline solution system with good polishing effect was successfully obtained, and the first time was to reduce the operating temperature and prolong the solution. An additive that has a long life and an improved polishing effect. The results show that adding appropriate additives to NaOH solution can produce good polishing effect. Exploratory experiments also showed that the reflectivity of aluminum surface could reach 90% after using NaOH solution of glucose under certain conditions. However, due to unstable factors in the experiment, which needs further studies. The feasibility of using pulse electropolishing method to polish aluminum under alkaline conditions was explored. The results showed that the leveling effect of constant voltage electropolishing could be achieved by pulse electropolishing method, but its flattening speed is slow.
2. aluminum alloy die-casting and aluminum alloy environmentally friendly chemical polishing
It is determined to develop a new environment-friendly chemical polishing technology based on phosphoric acid and sulfuric acid, which is to achieve zero emission of NOx and overcome the quality defects of previous similar technologies in the past. The key to the new technology is to add some special-effect compounds to the base fluid instead of nitric acid. Therefore, it is necessary to analyze the chemical polishing process of aluminum triacid, especially the role of nitric acid. The main role of nitric acid in the chemical polishing of aluminum is to suppress pitting corrosion and improve polishing brightness. Combined with the chemical polishing test of pure mono-phosphoric acid, it is concluded that the special substance added in mono-phosphoric acid should be able to inhibit the spot corrosion, alleviate general corrosion,at the same time, have a great leveling and bright effect.
